Blistering of composition shingles is not uncommon in the Houston area. It tends to occur when there’s a defect in the manufacture of the shingles, causing moisture in the layup of the shingles to vaporize after installation and causing small blisters. These blisters...
I was inspecting a newly constructed building and found this bullet damage where the bullet can be seen in the roof. I normally find these within the 610 loop and most often on the east side, but his was in a more rural area. See our other article on bullets in...
Why Gutters Gutters are installed to collect and control water run off from a roofing system and to control the water until it can be carried far enough away from a building that it does not create a potential for water entry at the roof, walls, or foundation and so...
Recent Comments